scrunner63
01-22-2014, 04:59 AM

Hi All,

I've found the codes to activate the fog lights when turning. Will this work on a F30 without adaptive headlights? It seems like it should, but was wondering if anyone has had success with this.

shawnsheridan
01-23-2014, 12:38 PM

Hi All,

I've found the codes to activate the fog lights when turning. Will this work on a F30 without adaptive headlights? It seems like it should, but was wondering if anyone has had success with this.
It should. Cornering Lights are separate from Adaptive Head Lights.

snj1013
01-23-2014, 01:14 PM

I would interested in the Fog Lights being on by default when the headlights are on. Is there a code for this?

shawnsheridan
01-23-2014, 01:19 PM

Not that I have ever found.

NewNole2001
01-24-2014, 08:47 AM

I would interested in the Fog Lights being on by default when the headlights are on. Is there a code for this?

Please don't do this. Fog lights when there is no fog just serves to blind any drivers in front of you.

gregwym
01-24-2014, 09:14 AM

I think this is different than switching on Fog Light all the time when there is no Fog. This is only switch on one side of the Fog light when turning the steering wheel for better cornering vision. I would also like to do so. This is a standard feature for my Tiguan and I miss it on my new F25.

Cloud you please share the code?

NewNole2001
01-24-2014, 09:17 AM

I think this is different than switching on Fog Light all the time when there is no Fog. This is only switch on one side of the Fog light when turning the steering wheel for better cornering vision.

Yeah, I have that on my '12 328. If he's talking about just cornering fog lights that's fine, but the way he (or she) wrote it as "on by default when the headlights are on" made me think otherwise.

I just see more and more drivers with their fog lights on all the time nowadays.

snj1013
01-24-2014, 09:17 AM

Please don't do this. Fog lights when there is no fog just serves to blind any drivers in front of you.
How did you come to this conclusion? The fogs disperse light low to the ground. Maybe your experience is with aftermarket fog lights that may be improperly installed.

NewNole2001
01-24-2014, 09:19 AM

How did you come to this conclusion? The fogs disperse light low to the ground. Maybe your experience is with aftermarket fog lights that may be improperly installed.

Go check it out tonight (assuming it isn't foggy). Find a dark road, have a friend drive towards you, while you drive their car. Notice how dazzling the fog lights are.

Fog lights are named fog lights and not "extra headlights" for a reason.

gregwym
01-24-2014, 09:30 AM

Fog lights are named fog lights and not "extra headlights" for a reason.

Agree, :rofl:. Fog light shouldn't be used inappropriately.

davidliu
01-24-2014, 03:14 PM

It should. Cornering Lights are separate from Adaptive Head Lights.

can you post the code? will it work for F01.

shawnsheridan
01-24-2014, 03:53 PM

I might have misspoke above. While the Cornering Lights are in fact separate from the Adaptive Head Lights for F30, I think AHL may still be a prerequisite for the cornering lights to work. Here are the F30 codes though:

Cornering is FEM_BODY => C_CLC_ENA = F30enable

AHL is FEM_BODY => C_BLC_ENA = F30enable

scrunner63
01-24-2014, 05:42 PM

I coded this & confirmed this works on a F30 without adaptive headlights. The cheat sheet I had showed 6 separate codes & I coded them all.

FEM_BODY >> 3073 C_CLC_ENA = F30Enable
FEM_BODY >> 3073 C_BLC_ENA = F30Enable
FEM_BODY >> 3066 KL_ENABLE_LI = KL_Ein
FEM_BODY >> 3066 KL_ENABLE_RE = KL_Ein
FEM_BODY >> 3062 MAPPING_abbiegel_L_output = nsw_l
FEM_BODY >> 3062 MAPPING_abbiegel_R_output = nsw_r

gregwym
01-24-2014, 08:05 PM

I coded this & confirmed this works on a F30 without adaptive headlights. The cheat sheet I had showed 6 separate codes & I coded them all.

FEM_BODY >> 3073 C_CLC_ENA = F30Enable
FEM_BODY >> 3073 C_BLC_ENA = F30Enable
FEM_BODY >> 3066 KL_ENABLE_LI = KL_Ein
FEM_BODY >> 3066 KL_ENABLE_RE = KL_Ein
FEM_BODY >> 3062 MAPPING_abbiegel_L_output = nsw_l
FEM_BODY >> 3062 MAPPING_abbiegel_R_output = nsw_r

Nice, I will try this when I start coding my F25. Thanks for sharing.

davidliu
01-24-2014, 08:20 PM

I coded this & confirmed this works on a F30 without adaptive headlights. The cheat sheet I had showed 6 separate codes & I coded them all.

FEM_BODY >> 3073 C_CLC_ENA = F30Enable
FEM_BODY >> 3073 C_BLC_ENA = F30Enable
FEM_BODY >> 3066 KL_ENABLE_LI = KL_Ein
FEM_BODY >> 3066 KL_ENABLE_RE = KL_Ein
FEM_BODY >> 3062 MAPPING_abbiegel_L_output = nsw_l
FEM_BODY >> 3062 MAPPING_abbiegel_R_output = nsw_r

I can't find FEM_BODY in FRM or KOMBI for F01. can you tell me what module for F01?

shawnsheridan
01-24-2014, 08:35 PM

I can't find FEM_BODY in FRM or KOMBI for F01. can you tell me what module for F01?
FEM_BODY is the Front Electronics Module in F20 / F30. These codes in an F01, if they exist, would be in FRM.

The cornering lights on an F10 though are the inside headlights and not the Fog Lights, and I would expect the same on an F01.

davidliu
01-24-2014, 09:24 PM

FEM_BODY is the Front Electronics Module in F20 / F30. These codes in an F01, if they exist, would be in FRM.

The cornering lights on an F10 though are the inside headlights and not the Fog Lights, and I would expect the same on an F01.

I think my F01 already has Dynamic Xenon (Cornering light while i make turn). it is possible to codes and activate the fog lights when turning/cornering. I go through FRM section and I can't find anything to activate fog lights when turning/cornering.

thanks
David

shawnsheridan
01-25-2014, 05:27 AM

I think Cornering Fog Lights is only possible on F20/F30.

Timbits93
01-25-2014, 10:02 AM

I think Cornering Fog Lights is only possible on F20/F30.

And X5s (E70 and F15)

Least every other X5 I see around has cornering fog lights.

Coded it on my F30 few months ago, it helps a bit given mine isn't equipped with Adaptive Xenons (just auto-leveling Xenons) so it definitely compensates for it. My last car (G35) had *slow-responding* adaptive xenons

gregwym
01-25-2014, 06:59 PM

I think Cornering Fog Lights is only possible on F20/F30.

Is it possible on F25?


Sent from BimmerApp mobile app

JMocki
02-17-2014, 11:01 AM

Hi,

i coded that the foglight not active when turning,
but now my frontlight are static and not
light the direction (adaptive curve light)

i have to coded to default to test weater it is normal

clausx3
02-17-2014, 11:26 AM

Is it possible on F25?


Sent from BimmerApp mobile app

Unfortunately not :dunno:

gregwym
02-23-2014, 11:16 PM

Unfortunately not :dunno:

Thats too bad...
I was looking all around the internet and in the FRM FDL, no luck.

But looks like E83 has them as standard?!
https://www.bimmerfest.com/forums/sh...d.php?t=669576
I wonder why BMW took such a useful feature out completely. (Not even with coding)

f30jojo
02-25-2014, 06:18 AM

I was hoping to find a way to turn off the useless cornering/foglights. You turn the wheel more than an inch or two and the d@mn fog lifght comes on. looks tacky to me IMO.

gregwym
02-25-2014, 07:51 AM

I was hoping to find a way to turn off the useless cornering/foglights. You turn the wheel more than an inch or two and the d@mn fog lifght comes on. looks tacky to me IMO.


I found it pretty useful if your car do not have adaptive head light.


Sent from BimmerApp mobile app

Menno86
10-31-2014, 04:08 PM

I would like the cornering lights, but i want to turn on while reversing. Is that possible?

vince59
11-30-2014, 06:38 AM

I would like the cornering lights, but i want to turn on while reversing. Is that possible?

I am not sure...is it possible to code fog light when cornering?

F25x
12-01-2014, 01:37 AM

Is it possible on F25?


Sent from BimmerApp mobile app
Yes,this is possible.I'll check my FRM fdl file and inform you how to activate it.

vince59
12-01-2014, 05:47 AM

Yes,this is possible.I'll check my FRM fdl file and inform you how to activate it.

Yes please....thank you for your support!!!

F25x
12-02-2014, 02:47 AM

Yes please....thank you for your support!!!

Ok!You must to change 4 values in FRM.

3080
Lamp-map-para-satz-01 must be set to BV-F025_WERT02_Corneringlight-UBER-NSW
Lamp-map-para-satz-02 must be set to BV-F025_WERT02_Corneringlight-UBER-NSW

3400
ALC-AFS-ENABLE set to aktiv

and one more value in 3060 must be changed to AUS 13.0 v but i can't find which one.
Because of that please compare my FRM ncd file with your ncd file and you find the correct value.

vince59
12-02-2014, 06:09 AM

Ok!You must to change 4 values in FRM.

3080
Lamp-map-para-satz-01 must be set to BV-F025_WERT02_Corneringlight-UBER-NSW
Lamp-map-para-satz-02 must be set to BV-F025_WERT02_Corneringlight-UBER-NSW

3400
ALC-AFS-ENABLE set to aktiv

and one more value in 3060 must be changed to AUS 13.0 v but i can't find which one.
Because of that please compare my FRM ncd file with your ncd file and you find the correct value.

Thanks for you kind support. I'll have a look and let you know

vince59
12-03-2014, 09:41 AM

It seems it does not work. I did not try yet.

The guy that tested has automatic lights... what optional do you have. Can you please show your VO and the optionals?

I think we miss the ALC option in the VO as well as the related hardware

Thanks

F25x
12-04-2014, 12:35 AM

It seems it does not work. I did not try yet.

The guy that tested has automatic lights... what optional do you have. Can you please show your VO and the optionals?

I think we miss the ALC option in the VO as well as the related hardware

Thanks

:dunno:

1CA,1CC,1CD,205,216,226,230,248,249,258,2MS,2PA,2V G,302,316,
320,337,3AH,3MC,413,423,428,430,465,481,493,494,4C H,4U2,502,
508,520,521,522,534,544,548,563,5DA,609,614,615,69 8,6AL,6NF,
6NK,6NR,6UD,6VA,6VC,715,760,775,7XA,842,877,880,8K A,8SM,8TG,
8TN,8V3,925,9CG.

vince59
12-04-2014, 01:15 AM

:dunno:

1CA,1CC,1CD,205,216,226,230,248,249,258,2MS,2PA,2V G,302,316,
320,337,3AH,3MC,413,423,428,430,465,481,493,494,4C H,4U2,502,
508,520,521,522,534,544,548,563,5DA,609,614,615,69 8,6AL,6NF,
6NK,6NR,6UD,6VA,6VC,715,760,775,7XA,842,877,880,8K A,8SM,8TG,
8TN,8V3,925,9CG.

Thanks I believe the car needs to have the specific hardware for the ALC.
There are twopieces of electronics in the lamp. The main one drives the xenon light the other one drives lamp "movement".

It is not a problem but nice to know. Thanls a lot for your help! :up::up:

vince59
12-07-2014, 01:17 PM

I am assumeing the ALC optional requires different lamps. I cjhecked real oem and they provide different part number if the car has ALC:

NO ALC: 63177238787 (left NORMAL fog light amp)
YES ALC: 63177238789 (left ALC fog light lamp).

BTW the picture looks pretty same.

TURBO4DR
08-24-2016, 01:17 PM

I was hoping to find a way to turn off the useless cornering/foglights. You turn the wheel more than an inch or two and the d@mn fog lifght comes on. looks tacky to me IMO.

Just FYI, I had this done as I didn't like the cornering lights coming on all the time as well. It def is possible. I still have my adaptive HL but cornering is now off. I didn't do this set of coding myself it was by someone else but the functionality is def possible.

jackylooo
08-25-2016, 12:06 AM

Is there anyone successfully enable this on F10?

fatespb
08-25-2016, 08:01 AM

Ok!You must to change 4 values in FRM.

3080
Lamp-map-para-satz-01 must be set to BV-F025_WERT02_Corneringlight-UBER-NSW
Lamp-map-para-satz-02 must be set to BV-F025_WERT02_Corneringlight-UBER-NSW

3400
ALC-AFS-ENABLE set to aktiv

and one more value in 3060 must be changed to AUS 13.0 v but i can't find which one.
Because of that please compare my FRM ncd file with your ncd file and you find the correct value.

It required additional strings:

FRM | 3400 FRM_TMS_AHL_LWR | AHL_ENABLE = active
FRM | 3060 FRM_U_EFFEKTIVE |U_EFF_CL = wert_07__13,0V

It works on my F25 2013 :up:
But I didn't find last parameter 07__13,0V on F25 2011 with old ISTEP

userM
12-07-2016, 03:01 AM

Right now I don't have fog lights, but I am searching to buy a set for my F20.
Can someone advise if I will need only coding for the cornerning effect, or I need hardware too?


eg something like this? https://www.ebay.com/itm/BMW-OEM-Cor...LoAAOSwNSxU9iE 6&vxp=mtr

Trygun
02-07-2017, 12:44 PM

I modified the 6 parts per turn cornering foglights but with the halogen headlights not working? F30 thank you

Trygun
02-12-2017, 01:14 AM

I can not activate this function .. someone can pass his CAF files to see the differences? thank you

vkopanja
07-23-2017, 12:16 AM

I coded this & confirmed this works on a F30 without adaptive headlights. The cheat sheet I had showed 6 separate codes & I coded them all.

FEM_BODY >> 3073 C_CLC_ENA = F30Enable
FEM_BODY >> 3073 C_BLC_ENA = F30Enable
FEM_BODY >> 3066 KL_ENABLE_LI = KL_Ein
FEM_BODY >> 3066 KL_ENABLE_RE = KL_Ein
FEM_BODY >> 3062 MAPPING_abbiegel_L_output = nsw_l
FEM_BODY >> 3062 MAPPING_abbiegel_R_output = nsw_r

I coded this yesterday on my F30, and it doesn't work :dunno:.

But fog welcome lights work fine..

Rer67
07-24-2017, 11:15 AM

hi i have coded this option before the car go to the dealer... ( 1year )
was OK !

today i want recode this option and i don't see F30 enable but F020 enable in C_BLC_ENA and C_CLC_ENA ?
i not coding this option .... ?? why i have F020 ? and not F30 ?
thanks

Ibrahim24
07-24-2017, 01:48 PM

I coded this yesterday on my F30, and it doesn't work :dunno:.

But fog welcome lights work fine..

Light switch should be on Automatic mode in order to work.:up:

Rer67
07-25-2017, 11:49 AM

Hello,
I coded this day my F31 320XD.
I coded the welcome lights and the cornering foglights
The whole thing is working properly.
For information, with the latest PSDZDATA 62.1, that i have, I no longer have the F030_ENABLE for option in 3073 C_CLC_ENA and 3073 C_BLC_ENA but I only F020_ENABLE....
Here if it can help others ....

vkopanja
07-26-2017, 04:50 AM

Light switch should be on Automatic mode in order to work.:up:

Yup, I tried in both automatic, and manual... Does the car have to be moving or will it turn on/off even when stationary?

vkopanja
07-27-2017, 11:05 AM

Quick update - the coding works, but prerequisites are, headlights switch is on AUTO, and headlights need to be turned on (so, both conditions need to be met, and I could only test it/see it working when it got dark).




https://www.bimmerfest.com/forums/ar.../t-748299.html