Σελίδα 1 από 3 123 ΤελευταίαΤελευταία
Εμφάνιση αποτελεσμάτων : 1 έως 10 από 25

Θέμα: X3 (E83) 3.0i 2005

  1. #1
    Εγγραφή
    09-02-16
    Μηνύματα
    15
    Thanked
    5
    Rides
    0

    Προεπιλογή X3 (E83) 3.0i 2005

    Καλησπέρα και καλώς σας βρήκα.

    Πρόσφατα κάτοχος ενός Χ3 Ε83, με 1η αδεια κυκλοφοριας 09/2006.

    Εχω μερικά ερωτήματα και θα ηθελα μερικες απαντησεις, στα οποία θα είμαι όσο πιο συγκεκριμενος γίνεται.

    1. Δεν εχει εξοδο aux πουθενά. Ελεγξα και τον πορτακι πίσω απο το υποβραχιονιο. Μπορεί να προστεθει;;
    2. Δεν υπάρχει η λειτουργία της ηχητικής ειδοποίησης όταν δεν φοράς ζώνη. Μπορεί να προστεθεί μέσω λογισμικού ίσως;;
    3. Θα ηθελα να κλειδωνουν οι ασφαλειες μολις μπαινω μεσα στο αυτοκινητο η εστω μετα απο την εκκινηση. Γίνεται;
    4. Εχω ηλεκτρικά αναδιπλούμεμες καθρεπτες. Μπορεί να προστεθει η λειτουργία να ανοίγουν αυτοματα και να κλεινουν αυτοματα;
    5. Το Dvd player δεν διαβαζει το δισκακι, το οποίο ειναι σε καλη κατασταση. Τι μπορει να φταιει; Φτιαχνεται;

    Για αρχή αυτά....

  2. #2
    Εγγραφή
    23-12-09
    Περιοχή
    Αθήνα
    Μηνύματα
    11.174
    Thanked
    14068
    Rides
    1

    Προεπιλογή

    Παράθεση Αρχικό μήνυμα απο dnik Εμφάνιση μηνυμάτων
    Καλησπέρα και καλώς σας βρήκα.

    Πρόσφατα κάτοχος ενός Χ3 Ε83, με 1η αδεια κυκλοφοριας 09/2006.

    Εχω μερικά ερωτήματα και θα ηθελα μερικες απαντησεις, στα οποία θα είμαι όσο πιο συγκεκριμενος γίνεται.

    1. Δεν εχει εξοδο aux πουθενά. Ελεγξα και τον πορτακι πίσω απο το υποβραχιονιο. Μπορεί να προστεθει;;
    2. Δεν υπάρχει η λειτουργία της ηχητικής ειδοποίησης όταν δεν φοράς ζώνη. Μπορεί να προστεθεί μέσω λογισμικού ίσως;;
    3. Θα ηθελα να κλειδωνουν οι ασφαλειες μολις μπαινω μεσα στο αυτοκινητο η εστω μετα απο την εκκινηση. Γίνεται;
    4. Εχω ηλεκτρικά αναδιπλούμεμες καθρεπτες. Μπορεί να προστεθει η λειτουργία να ανοίγουν αυτοματα και να κλεινουν αυτοματα;
    5. Το Dvd player δεν διαβαζει το δισκακι, το οποίο ειναι σε καλη κατασταση. Τι μπορει να φταιει; Φτιαχνεται;

    Για αρχή αυτά....

    Καλωσήρθες φίλε μου στην παρέα μας και καλά χιλιόμετρα! Aν θες πέρνα και απο εδώ https://www.bmwfans.gr/forum/forumdisplay.php?f=23 για το official

    Για τις ερωτήσεις σου, αν και δεν έχω Χ3

    1) Ναι μπαίνει aux-in με διάφορους τρόπους. Είτε με aftermarket adapter είτε με ΟΕΜ https://www.xoutpost.com/articles/x3...ut-bmw-x3.html
    2) Στα USA είναι by default ενεργοποιημένο και το απενεργοποιούν με κωδικοποίηση ή και πιο hardcore λύσεις https://www.bimmerfest.com/forums/sh...d.php?t=431804 Εσύ θες να ενεργοποιήσεις? Είσαι σίγουρος?
    3) Γίνεται εύκολα με προγραμματισμό σε αντιπροσωπεία ή σε εξειδικευμένο συνεργείο.
    4) Εδώ λέει πως γίνεται και αυτό με προγραμματισμό
    The key fob can be programmed by the dealer. Basically, after closing the door, if you keep pressing the "close" button on your key fob, both mirrors will fold in. When you touch the handle to open the door, or press the "open" button on your key fob, both mirrors will swing out. Remember to tell the dealer to enable this feature for all keys. Some lazy tech will just do this for the first active key.
    https://www.bimmerfest.com/forums/sh...d.php?t=571194

    5)DVD player? Που είναι αυτό ακριβώς? Πίσω? Εννοείς το ΜΚ4 του navigation?
    Τελευταία επεξεργασία από το χρήστη BILL007 : 13-02-16 στις 19:54



  3. The Following 3 Users Say Thank You to BILL007 For This Useful Post:

    giannis_compact (23-02-16), Panos 316T (31-03-16), VanVIC (14-02-16)

  4. #3
    Εγγραφή
    09-02-16
    Μηνύματα
    15
    Thanked
    5
    Rides
    0

    Προεπιλογή

    Ευχαριστώ για τις απαντήσεις.

    Τις ζωνες τις θελω να χτυπανε. Παρασυρομαι συχνα και δεν θελω...

    Σχετικά με το 5, σωστα υπεθεσες. Αναφερομαι στο navigation player. Εκει πισω αριστερα που είναι. Δενξερω εαν ειναι μκ4, παντως γραφει dvd επανω....

  5. #4
    Εγγραφή
    23-12-09
    Περιοχή
    Αθήνα
    Μηνύματα
    11.174
    Thanked
    14068
    Rides
    1

    Προεπιλογή

    Ωραία! Ναι το ΜΚ4 είναι το dvd. ΜΚ1,2,3 είναι με CD.

    Κοίτα, αρχικά ξεκίνα απο τα πιο απλά. Βάλε ένα καθαριστικό DVD

    μετά οι χάρτες που έχεις είναι γνήσιο δισκάκι ή αντιγραφή?
    Αν είναι αντιγραφή πρέπει να είναι γραμμένο με τη μικρότερη δυνατή ταχύτητα Χ1 Χ2 Χ3 max και δισκάκι DVD-R.

    Αν ούτε αυτά δουλεύουν τότε πας για μεγαλύτερο σκάλισμα και αναλόγως πόσο πιάνουν τα χέρια σου

    https://www.xoutpost.com/articles/al...-nav-unit.html

    DIY for changing the laser unit in a MK4 sat nav unit
    This is a DIY for changing the laser unit in a MK4 sat nav unit.

    If the MK4 has problems reading map DVDs (regardless whether it is an original or a burned copy) the problem of repair arises.

    In fact you have several possibilities:
    a) Buy a new computer from your BMW dealer: no option for me. Much too dear.
    b) Buy a new computer at ebay: no option for me. Too dear as well.
    c) Send the computer to the VDO repair centre in Germany (here): I tried to reach someone there without any success.
    d) Buy a complete DVD unit (addresses at the end) and exchange it: there must be a cheaper possibility….
    e) Change the laser unit (addresses at the end) of the DVD unit: thatΆs it!!!!!

    First of all: I donΆt take any responsibilities. Everybody should know what he think is able to do.

    Keep your hands off if you are not used to handle with a small soldering iron and the below mentioned tools!!!

    Tools needed: small soldering iron, desoldering braid, screwdrivers Torx T4 to T8, small screwdriver for slotted screws.

    To open the MK4 you cut he seal at the back and remove the top cover carefully.
    It should look like here:


    The drive is screwed with 4 Torx screws (red circles). Unscrew them.
    The drive is connected with 2 cables. One of them simply is plugged in (red connector) and can be released by pulling. The second cable is a ribbon cable.To release it you first have to move the locking mechanism on both sides carefully with a small screwdriver towards the cable as shown here:


    After that the ribbon cable may be pulled out.
    We will have to open some other of these cables during our repair process. The way of doing it is always the same.
    The sat nat computer has lost its drive now.


    You have the complete DVD drive in you hand.


    For those of you who bought a complete DVD drive you just have to reassemble everything with the new drive in reversed order.
    For all others: now itΆs going to become interesting.
    On the top of the drive you see a shielding plate which is soldered at its four corners.


    Open the 4 solder points with the desoldering braid or a suction pump. After that you may remove the shielding plate carefully.
    Now it should look like here:


    The red circles show the former solder points of the shielding plate.
    Next you have to open the two connectors (yellow circles). After that remove the ribbon cable of the laser unit (orange circle) as described above.
    Now you have to unscrew the tree Torx screws (green circles). The printed circuit board (PCB) is just plugged in on its right side (on the photo).
    It should be flapped to the right side. Now it should look like here:


    Remove the two ribbon cables (red rectangles).
    Now it should look like here:


    On the laser unit you can see a small metal shield. ItΆs screwed with a small Torx screw and a very small crosshead screw (red circles). Remove both screws.

    The metal shield connects the laser unit with the spindle drive with shaft joint (green circle). In addition the metal shield actuates the end switch (yellow circle).

    Now you may move the laser unit on its rails. It should look like here:


    Next you have to remove the two T4 screws (red circles) that secures the rails at there far ends.
    The laser unit can be removed now by sliding it out carefully.

    The new laser unit may be assembled in reversed order. While doing so keep an eye on the small end switch at the motor. It has to be actuated by the metal shield.
    The laser unit should slide easy and smooth on its rails. After that:continue reassembling.

    Important; donΆt forget:
    Before assembling and soldering the shielding plate you have to remove the two small solder bridges on the ribbon cable (red circles). See here:


    And now have fun with your functioning MK4 computer!!!!!

    Where to buy:
    The DVD drive may be bought as a complete unit. ItΆs called "DVD-M3-4.6" and it costs about 130 euros.
    I found the following distributors (most of them in Germany):
    https://www.navigatie-onderdelen.nl/Webwinkel-Product-285814/DVD-M3-4.6-(navigatie)-loopwerk.html
    https://www.n-tronics.com/english/ele...laserunits.php
    https://www.donberg.de/descript/d/dvd_m3_4.6.htm
    https://www.powercomponents.nl/websho...ode=DVD+M3+4.6
    https://www.ebay.de (search for: DVD-M34.6), seller: bully1313
    https://www.lasertrader.de/sg_Laufwerke_BMW.htm
    https://www.grandata.co.uk/dvdm346dvdlaser-p-7676.html

    The laser unit itself is called „SF-HD4“.
    You may buy it
    - at ebay (search for seller „spillomax“) about 40 euros plus postage and packing
    - as remaining stock at Pollin (were I ordered) for 4.95 euros plus postage and packing

    Acknowledgment:
    IΆd like to thank „Paceyon“ from the German Motor-Talk forums who posted a verbal description first.

    ------------------------------------
    updated sources (20090919)
    https://www.mt-components.de/products...nssysteme.html
    https://www.lasertrader.de/
    https://www.n-tronics.com
    https://www.grandata.co.uk/sfhd4dvdlaser-p-7679.html
    Important is the black (!!!) plastic part around the lens.
    The ones with the white plastic part are for CD only.
    Συνημμένα αρχεία Συνημμένα αρχεία
    Τελευταία επεξεργασία από το χρήστη BILL007 : 13-02-16 στις 22:00



  6. The Following 9 Users Say Thank You to BILL007 For This Useful Post:

    A8hnaios (13-02-16), aristent (13-02-16), dnik (14-02-16), gnvsls (14-02-16), Lykouras (13-02-16), nikos valvetronic (14-02-16), Panos 316T (31-03-16), VanVIC (14-02-16), Vassilis ///M (13-02-16)

  7. #5
    Εγγραφή
    09-02-16
    Μηνύματα
    15
    Thanked
    5
    Rides
    0

    Προεπιλογή

    Καλημέρα.

    Το δισκακι ειναι γνήσιο. στην οθονη εμφανιζει οτι δεν μπορεί να το διαβάσει.

    Ελπίζω το cleane cd να κανει δουλεια.

    Υπάρχει περίπτωση να επηρεάζει ο καιρός; (καπου σε forum του εξωτερικού το ειχα διαβασει)

  8. #6
    Εγγραφή
    23-12-09
    Περιοχή
    Αθήνα
    Μηνύματα
    11.174
    Thanked
    14068
    Rides
    1

    Προεπιλογή

    Παράθεση Αρχικό μήνυμα απο dnik Εμφάνιση μηνυμάτων
    Καλημέρα.

    Το δισκακι ειναι γνήσιο. στην οθονη εμφανιζει οτι δεν μπορεί να το διαβάσει.

    Ελπίζω το cleane cd να κανει δουλεια.

    Υπάρχει περίπτωση να επηρεάζει ο καιρός; (καπου σε forum του εξωτερικού το ειχα διαβασει)
    Του ποτέ είναι οι χάρτες? Τα cd και dvd έχουν ημερομηνία λήξης! Αν είναι του 2004 παίζει να φταίει και το dvd.
    Αυτό περί καιρού είναι λίγο μύθος αν και το πιο πιθανό είναι κάποια ψυχρή κολληση στην πλακέτα(?),που με τις διαφορές θερμοκρασίας βρίσκει επαφή. Σε κάθε περίπτωση δεν πρέπει να περιμένεις τον καιρό

    Ξεκίνα με τα απλά και βλέπεις.
    Good luck!
    Τελευταία επεξεργασία από το χρήστη BILL007 : 14-02-16 στις 13:56



  9. #7
    Εγγραφή
    09-02-16
    Μηνύματα
    15
    Thanked
    5
    Rides
    0

    Προεπιλογή

    Οι χάρτες είναι του 2007. Ετσι λεει επανω στο dvd τουλαχιστον

  10. #8
    Εγγραφή
    23-12-09
    Περιοχή
    Αθήνα
    Μηνύματα
    11.174
    Thanked
    14068
    Rides
    1

    Προεπιλογή

    Παράθεση Αρχικό μήνυμα απο dnik Εμφάνιση μηνυμάτων
    Οι χάρτες είναι του 2007. Ετσι λεει επανω στο dvd τουλαχιστον
    Eίχες επιτυχία? Το δοκίμασες?



  11. #9
    Εγγραφή
    09-02-16
    Μηνύματα
    15
    Thanked
    5
    Rides
    0

    Προεπιλογή

    Παράθεση Αρχικό μήνυμα απο BILL007 Εμφάνιση μηνυμάτων
    Eίχες επιτυχία? Το δοκίμασες?
    ¨οχι ακόμη. Δεν βρήκα χρόνο.

    Ελπίζω τις επόμενες ημέρες....

  12. The Following User Says Thank You to dnik For This Useful Post:

    BILL007 (22-02-16)

  13. #10
    Εγγραφή
    09-02-16
    Μηνύματα
    15
    Thanked
    5
    Rides
    0

    Προεπιλογή

    update:

    Επιτέλους βρήκα λίγο χρόνο και ασχολήθηκα με τα παραπάνω θεματάκια που ήθελα.

    Ενεργοποιήθηκε το σύστημα με το αυτοματο κλείδωμα κατα την πορεία του οχήματος.

    Οι καθρέπτες διπλώνουν με το κλείδωμα και ξεδιπλώνουν με το ξεκλείδωμα.

    Στο κλείδωμα εκτος των alarm ακούγεται και μια φορά η κορνα του συναγερμου.

    Στο ξεκλείδωμα αναβοσβηνουν πλεον τα alarm 2 φορές κ ακούγεται και 2 φορές η κορνα του συναγερνού.

    Σχετικά με τις ζώνες, δεν ενεργοποιήθηκε η ηχητικη ειδοποίηση, καθως δεν υποστηρίζεται η απενεργοποίηση του ηχητικού οταν τις φοράς. (προεντατηρες)

    Το dvd player.... μετα τα κούλουμα....


    Καλό τριήμερο σε όλους..!!


    Στη διαθεση σας....
    Τελευταία επεξεργασία από το χρήστη dnik : 12-03-16 στις 17:18

  14. The Following 2 Users Say Thank You to dnik For This Useful Post:

    BILL007 (31-03-16), HLIAS - E36 (18-04-16)

Σελίδα 1 από 3 123 ΤελευταίαΤελευταία

Δικαιώματα - Επιλογές

  • Δεν μπορείτε να δημοσιεύετε νέα θέματα
  • Δεν μπορείτε να απαντάτε σε θέματα
  • Δεν μπορείτε να δημοσιεύετε συνημμένα
  • Δεν μπορείτε να επεξεργάζεστε τις δημοσιεύσεις σας
  •  
BACK TO TOP