Εμφάνιση αποτελεσμάτων : 1 έως 10 από 157

Θέμα: Σφαλμα low oil pressure

Threaded View

Προηγούμενο μήνυμα Προηγούμενο μήνυμα   Επόμενο Μήνυμα Επόμενο Μήνυμα
  1. #11
    Εγγραφή
    09-05-14
    Μηνύματα
    1.022
    Thanked
    619
    Rides
    0

    Προεπιλογή

    εγω
    so the 3.7 is part of 4250 or its separate?
    in cooling system? can you please define more? and if its in to that,then how is it diagnosed?
    the level sensor in sump? how is it diagnosed again please? but i doupt its that ,it was working fine before..its the same trap with the indicator oil going back to front and they thought it was that.
    how much does it cost replacing stem shells at dealership? do you know?
    ο αγγλος
    Yes it’s part of the 4.25 the other 0.5 litres will be within the engine.
    The sensors can just fail over time, oil changes can also cause a sensor to stop working properly. My 335i one was working but then became unreliable after a service. Only real way to diagnose is to drop oil out and measure what oil comes out of sump.

    replacing stem seals at a dealer will be rather expensive as it requires cylinder head removing to do it properly. You can get kits that fill cylinder with compressed air to hold valves closed so they can be changed by just removing camshafts and valve springs and leaving head on. Whether a dealer would do it this way I don’t know.
    Like I say head removal to do properly and that’s how I would do it so I could decoke and relap valves after.

  2. The Following User Says Thank You to dreamer For This Useful Post:

    BILL007 (24-08-23)

Δικαιώματα - Επιλογές

  • Δεν μπορείτε να δημοσιεύετε νέα θέματα
  • Δεν μπορείτε να απαντάτε σε θέματα
  • Δεν μπορείτε να δημοσιεύετε συνημμένα
  • Δεν μπορείτε να επεξεργάζεστε τις δημοσιεύσεις σας
  •  
BACK TO TOP