εαν καταλαβα καλα σε Ε90 εχουν αυτο το θεματακι:Αρχικό μήνυμα απο Nikos!
IMPORTANT NOTES about 10mm/12mm spacers
Note that the hub contour height for use with our 10mm/12mm spacers requires a maximum dimension of 11.5mm. Anything taller (such as rust buildup or dust caps) can damage the spacer or even break off the hubcentric lip machined onto the spacer. Please measure your hub to ensure compatibility before ordering. Spacers that are damaged because of excessive hub contour height are not covered by Rogue Engineering's warranty policy.
10mm and 12mm spacers require rims with chamfered hub faces. To determine if you have the appropriate wheel, compatible with these spacers, see the following pictures.
10mm/12mm spacers OK
10mm/12mm spacers NOT OK
Wheels found to be incompatible with these 10mm/12mm spacers, because of an insufficient rear chamfer depth, include the Kosei K1.
For wheels with insufficient rear chamfer depth, consider our new 10mm flat spacer.
Απάντηση με παράθεση