Διατηρηση Μπαταριας

[Z4 DCT]

Κ να ρωτήσω κ γω κάτι απλό;

Αυτο,σα του Γιάννη...

Μπορω να το βάλω σήμερα πάνω κ να το βγάλω τα Χριστούγεννα που θα πάω στο νησι πάλι ή θα το ανατιναξω;ή στη καλύτερη των περιπτώσεων θα τη φορτίσει κ θα κλείσει;...μπορεί αυτο να ελέγχει κ να τη κρατά τσιτα φορτισμένη;

Αν όχι...υπάρχει κάτι άλλο που το κάνει αυτο;

Δλδ να το αφήνεις για κανά δίμηνο πάνω απροβληματιστα;


Sent from my iPhone using Tapatalk

Βασιλη απο οτι λεει και στο manual, δεν εχει θεμα....εχει και ασφαλεια μεσα και επεξεργαστη που φορτιζει την μπαταρια και την κρατα σε εγρηγορση......


ome Page > Products > Tools > Stationary Tools > Car Equipment > Battery charger BT-BC 12 D-SE
Battery charger BT-BC 12 D-SE

The BT-BC 12 D-SE is a automatic battery charger controlled by a mirco-processor. This means, its especially to charge maintenance-free batteries as well as for long time charging and for charge maintenance from batteries which are not permanently in use, such as boats, lawn mowers and whatnot. Due to the integrated mirco-processor the charging curve has 3 steps. Step one charges the battery with nearly constant current up to approx. 85%, step two with constant voltage up to approx. 95%. Step three keeps the battery voltage constant (IUoU-charging characterisic) and so is the battery always fully loaded. Therefore is the tool also for lead acid batteries and gel batteries optimally proper. A integrated fault diagnose system advise at the LED-display onto battery fault and connection problem. The charging will be controlled electronically and accordant indicated. The charging current can attuned to 2 / 6 / 12 ampere. This battery charger has also a 12 V d.c. output socket which provides working power up to 140 Watts for 12 V d.c. operated appliance.

Features

Charging automatic by a controlled micro-processor
Fault diagnose system
LED-display for current, voltage, battery full, battery charging, fault
Switch for charging current adjustment (2 / 6 / 12 ampere)
Switch for On / off
Switch for 12 Volt d.c. output on / off with LED-indicator
Switch for ongoing battery voltage
Charging leads with sturdy pole clamps
Error report on a triple-digit LED-display
Cigarette lighter jack for 12 Volt d.c. output
Electronic overlaod-, voltage reversal- and short circuit protection
Power line with european plug



Technical Data
Mains 220-240 V ~ 50 Hz
Rated input current 1,66 A
Rated output voltage 12 V d.c.
Rated output current 12 A
Charing current 2 / 6 / 12 A
Battery capacity at 2 A 6-20 Ah
Battery capacity at 6 A 20-60 Ah
Battery capacity at 12 A 40-120 Ah