PDA

Επιστροφή στο Forum : Προβλημα με ΝΑVI σε Μ3 e46 ( δεν φαινεται στην οθονη)



diass
02-06-17, 18:14
καλησπερα σε ολους εχω ενα θεματακι με το NAVI μου,
ενω η μοναδα( mk3 - cd ) πισω λειτουργει κανονικα,
μεσα στην οθονη δεν φαινεται σαν επιλογη το NAVI σαν να μην υπαρχει εγκατεστημενο!!!!
το αυτοκινητο ειναι παρκαρισμενο εδω και αρκετο καιρο με την μπαταρια εκτος γιατι την εχω σε μηχανημα για συντηρηση!!!
υπαρχει καποιος να γνωριζει ????
οι ασφαλειες που εχουν σχεση με το navi βαση του σχεδιαγραμματος που εχει μεσα ειναι καλες (κοιταξα 2 που ανφερονται στο navi )


ευχαριστω και τον "BMWNAOUSSA" για την βοηθεια του με τους χαρτες!!!! thumb:thumbsup::cheers:

BILL007
03-06-17, 17:33
Καλησπέρα,

Το πρόβλημα το είχες εξαρχής ή το απέκτησες κατά την ακινησία?
Το ότι η μονάδα λειτουργεί κανονικά πως το έχεις καταλάβει? Επειδή λειτουργεί το eject?

:original:

BILL007
03-06-17, 17:40
Aν βοηθάει σε κάτι δοκίμασε και το service menu της οθόνης:




Advanced Programming and Secret Menus of the Widescreen Navigation Display


Advanced Programming and Secret Menus of the Widescreen Navigation Display


A good place to start on understanding the BMW Widescreen Monitor is the BMW TIS Supplement 84 11 00 BMW widescreen Information Document (https://www.bimmernav.com/pdf/BMWwidescreeninfo.pdf)


This document describes how to enter the service mode of the Navigation Display



https://www.bimmernav.com/images/service.jpg (https://www.bimmernav.com/pdf/BMWwidescreeninfo.pdf)



As described in this document, position R is the key in the turned in the ignition to the furthest most part without starting the vehicle.



https://www.bimmernav.com/images/DSCF0053.JPG


Follow the above instructions to put your display in service mode



https://www.bimmernav.com/images/DSCF0055.JPG


Service mode provides a number of options. The first option is On-board Monitor. To modify settings or check if keys are functioning correctly enter this menu item by pressing the navigation rotary button



https://www.bimmernav.com/images/DSCF0058.JPG


Once you are in this menu item you can choose from the options available by selecting the Function option



https://www.bimmernav.com/images/DSCF0059.JPG


The function option allows you to verify Key functions on the navigation display, or modify the brightness of your display.



https://www.bimmernav.com/images/DSCF0062.JPG



When the Brightness option is selected you can use the navigation rotary to increase or decrease your display brightness. *****In addition to adjusting your brightness with this menu item you can also adjust the color and auto adjust for daylight features in the main "set" menu item. Look for Day/Night and Color settings below

(https://www.bimmernav.com/Advanced_Programming_and_Secret_Menus_of_the_BMW_W idescreen_Navigation_Display.html#Day/Night%20Setting)


https://www.bimmernav.com/images/DSCF0066.JPG



Other items you can review are the Navigation Graphic Element screen. This screen details the Navigation Computer you are using



https://www.bimmernav.com/images/DSCF0068.JPG


The GPS status menu item which details your GPS coordinates



https://www.bimmernav.com/images/DSCF0069.JPG


Using the Functions Key also allows you to view your GPS Satellites that are currently being detected and used.



https://www.bimmernav.com/images/DSCF0070.JPG


Sensor check are the additional sensors that are routed from the vehicle to the navigation computer



https://www.bimmernav.com/images/DSCF0072.JPG


Telematics setting details information contained in your Navigation computer that is transmitted back to the service center when the EMERGENCY menu option is used.


Day/Night Setting

By far the best setting that you can adjust the look of the 16:9 display is to turn off the Day/Night Feature of the MKII software. BMW nuked this feature in the MKIII hardware as it just does not work very well. Below is the way to turn off this feature. -Thanks for the pictures Todd E.!



https://www.bimmernav.com/images/Main_Menu.JPG


From the Main menu select the SET selection



https://www.bimmernav.com/images/Day_Night-2.JPG


https://store.bimmernav.com/blogs/how-to-guides/advanced-programming-and-secret-menus-of-the-widescreen-navigation-display

diass
04-06-17, 00:30
Αυτό ξεκίνησε κατά την ακινησία ! Και από ότι θυμάμαι έχει αλλάξει και το μενού !!!! Ήταν σαν αυτό που έχει εδώ στις φωτογραφίες μετά άλλαξε παίζει να θέλει update ???? Θα δοκιμάσω αυτό που μου έστειλες αύριο όταν γυρίσω από την δουλειά !!! Σε ευχαριστώ και πάλι

diass
04-06-17, 15:36
Καλησπέρα και πάλι το δοκίμασα αλλά μου βγάζει μόνο στο σέρβις μενού για τον υπολογιστή ταξιδιού και για την τηλεόραση επιλογή !!!!
Φαντάζομαι πως θα χρειάζεται κάποιο update !!! Υπάρχει διαθέσιμο ;;;;; ευχαριστώ για την βοήθεια και πάλι !!!

diass
04-06-17, 16:16
Ψάχνοντας έπεσα πάνω σε αυτό !!!!

https://e39source.com/archives/797

Λέτε να κάνω το update με το Μ logo ??????

BILL007
04-06-17, 19:19
:+1: Να δοκιμάσεις ένα update δεν χάνεις κάτι... :original: Αν και κάτι μου λέει πως είναι πρόβλημα στην καλωδιώση του Navi.

S54POWER
06-06-17, 21:01
κρασαρει το ΜΚ3 σου, θεμα επεξεργαστη αν θυμαμαι καλα. Ποτε θα δουλευει ποτε οχι. Ειναι καλυτερα αν δεν εχεις μεσα το cd