PDA

Επιστροφή στο Forum : [E46] αισθητηρας φωτων



gyiama
23-05-10, 23:16
μηπως εχει καποιος κανενα DIY της προκοπης για αισθητηρα βροχης/φωτων για Ε46 ?εχω ψαξει ολο το νετ και τπτ δεν βρηκα οτι ναναι ειναι ολα με πολλες ασαφιες θα ελεγα!!!!!

giannis_compact
24-05-10, 02:50
Πανο εννοεις αυτο που αναβει αυτοματα τα φωτα σωστα?Πρεπει να αλλαξεις και παρμπριζ δυστυχως :(

gyiama
24-05-10, 09:04
ναι αυτο λεω οκ θα αλλαξω μπαρμπριζ το θεμα ειναι να βρω ενα κατατοπιστικο diy για την καλωδιωση και την συνδεσμολογια τα αλλα τα ξερω!!βασικα την καλωδιωση με ενδιαφερει πιο πολυ!!!

Nino
24-05-10, 09:10
Δεν ειναι μεγαλο το κοστος.. για αυτο που προσφερει?

gyiama
24-05-10, 09:14
ολα μαζι αισθητηρας κλπ θα βγουν κανενα 100αρι + το μπαρμπριζ που εχει 2 ραγισματακια και τοσο καιρο δεν το αλλαζα γιατι ειναι το μαμα,αλλα γι αυτη την ιστορια θα το αλλαξω!!!!!!στην αντιπροσωπεια φυσικα!!!!!!!!!!!

gyiama
25-05-10, 09:15
ρε παιδια μηπως ..λεω μηπως εχει καποιος το σχεδιο για την εγκατασταση του αισθητηρα απ το TIS???το προγραμμα που εχει η BMW!!η αν ξερει καποιος που θα βρω το TIS ας μου στειλει ενα πμ!!!!!η μηπως ειναι ιδιο με το ΕΤΚ?μεσα στο ΕΤΚ εχει τα pdf εγκαταστασης και επισκευης???δεν το εχω ψαξει τοσο καλα να πω την αληθεια

m-power_01
25-05-10, 10:29
ρε παιδια μηπως ..λεω μηπως εχει καποιος το σχεδιο για την εγκατασταση του αισθητηρα απ το TIS???το προγραμμα που εχει η BMW!!η αν ξερει καποιος που θα βρω το TIS ας μου στειλει ενα πμ!!!!!η μηπως ειναι ιδιο με το ΕΤΚ?μεσα στο ΕΤΚ εχει τα pdf εγκαταστασης και επισκευης???δεν το εχω ψαξει τοσο καλα να πω την αληθεια

Παναγιωτη ο ηλεκτρολογικο διαγραμμα ειναι στο wds θα στο ανεβασω προς το απογευματακι!

gyiama
25-05-10, 11:09
ξερω Σπυρο απλα το wds το εχει πολυ αναλυτικα δλδ αντιστασεις κομβους κλπ εγω λεω το ΤΙS Λεει αυτο παει απο δω εδω κλπ πιο απλα δλδ !!ανεβασε το εσυ ισως με βοηθησει καλυτερα!!!ευχαριστω

m-power_01
25-05-10, 13:41
Θα ψαξω να στο βρω και στο tis...

m-power_01
25-05-10, 13:44
Απο το wds και αυτα!

Rain / driving light sensor
The rain-driving light sensor has integrated sensors that sense the wetness on the windshield glass and the ambient light.

Rain sensor
The rain sensor is an optical system. It consists of an optical element bonded on the windshield and an electronic element. The electronic evaluation unit and 4 optical transmitter and receiver diodes are integrated in the electronic element.

Function
The rain sensor is activated when the wiper switch is moved to the first stop position.

When the rain sensor is activated, visual feedback is given to the driver in that one wiping cycle is executed first. Then, the transmitter diodes emit an infrared light which is guided across the optical element to the windshield. If the windshield is completely dry and clean, the infrared light is fully reflected to the receiver diodes.

If there is water or dirt in the area of the optical element on the windshield, full reflection of the infrared light is no longer possible. Part of the light penetrates the windshield so that only part of the light arrives at the receiver diodes. The electronic circuitry detects how much water is on the windshield on the basis of the amount of light that is being blocked out and send a signal to that effect via the K bus. The ZKE basic module then performs a wipe cycle. In the case of very heavy rain, the intermittent operation goes into stage 1 or stage 2 of the continuous wiping mode.

A heating element integrated in the rain sensor prevents misting of the optical element or the diodes.

The sensitivity of the rain sensor can be varied in 4 sensitivity stages by means of the knurled wheel on the wiper/washer switch. Each time the adjuster wheel is moved in the ”Increase sensitivity” direction (upwards), a wipe cycle is carried out.

When the vehicle is at a standstill, there is an automatic reduction of the sensitivity so that the wiper usually runs in intermittent mode.

If the rain sensor fails, the wiper runs at a fixed time interval.

For safety reasons, the rain sensor is switched off when terminal R is switched off.

Requirements for faultless operation of the rain sensor are:

No wax smear on the windshield

Wiper blades OK

Windshield glass free of faults in the area of the rain sensor

Optical element bonded free of bubbles with the windshield glass

Initialization
Due to the optical process, the rain sensor has to be adapted to the windshield. This adaptation takes place at initialization.

Requirement for faultless initialization is that the windshield glass is dry, clean and free of defects in the area of the rain sensor.

The initialization is performed using the service function ”Initialize rain sensor” in the BMW diagnosis system. In the service function, the adaptation values in the rain sensor are deleted. This is followed by adjustment of the sensor system to the windshield based on the following sequence:

Switching off the rain sensor

Switch off terminal 15 and terminal R

Switch on terminal R and terminal 15 and wait 10 seconds

In the 10 seconds waiting period, the new adaptation values are determined and stored.

Initialization of the rain sensor is necessary:

After replacing the windshield

Fitting a used rain-driving light sensor
Note: a used sensor must be coded beforehand!

Driving light sensor
The driving light sensor consists of two photodiodes and an electronic evaluation unit. The photodiodes are arranged in such a way that both light striking the sensor from the front and light striking the sensor from above (ambient light) are sensed.

If there is a change in the light conditions, a signal is sent across the K bus. If the automatic headlights system is active, the light control center switches the headlights on or off.

The light sensing is active as of terminal R, independent of whether the automatic driving light system is switched on or off.

Adjustment of the driving light sensor on the windshield is by means of coding. This is why a used sensor must be recoded on installation!

gant
25-05-10, 15:55
Ετοιμαζόμουν να γράψω ποστ, γιατί πέρασα το πρωί από αντιπροσωπεία της ανατολ. Θεσσαλονίκης να ρωτήσω για πιθανότητα τοποθέτησης αισθητήρα φώτων, μια που φορώ τα εργοστασιακά ξένον και κουφάθηκα όταν μου είπαν πως πρέπει να αλλάξω πρώτα απ όλα παρπρίζ, αν θέλω αισθητήρα φώτων η βροχής.
Για να μαι ειλικρινής, πίστεψα πως θα κάνουν λάθος, μέχρι που το βλέπω εδώ γραμμένο από συμγορουμίτες πως πράγματικά έτσι είναι. :shok::shok:
Πολύ κακό για το τίποτα δηλαδή!
Να μου λείπει λοιπόν το μπαξ.

gyiama
25-05-10, 18:43
ναι θελει αλλαγη Γιωργο και το θεμα ειναι οτι μαλλον δεν αξιζει τον κοπο γι αυτο που προσφερει!!εγω αν θα το κανω θα τοκανω για οτν λογο που γραφω σε αλλο θρεντ δλδ μπας και λυσω ενα προβλημα με αυτο!!!

NickE60
25-05-10, 19:37
Ετοιμαζόμουν να γράψω ποστ, γιατί πέρασα το πρωί από αντιπροσωπεία της ανατολ. Θεσσαλονίκης να ρωτήσω για πιθανότητα τοποθέτησης αισθητήρα φώτων, μια που φορώ τα εργοστασιακά ξένον και κουφάθηκα όταν μου είπαν πως πρέπει να αλλάξω πρώτα απ όλα παρπρίζ, αν θέλω αισθητήρα φώτων η βροχής.
Για να μαι ειλικρινής, πίστεψα πως θα κάνουν λάθος, μέχρι που το βλέπω εδώ γραμμένο από συμγορουμίτες πως πράγματικά έτσι είναι. :shok::shok:
Πολύ κακό για το τίποτα δηλαδή!
Να μου λείπει λοιπόν το μπαξ.

κάλυψη κρυστάλλων δεν έχετε? :whistle:

gant
25-05-10, 19:45
κάλυψη κρυστάλλων δεν έχετε? :whistle:

:th_Laie_67-1::th_Laie_67-1::th_Laie_67-1::th_Laie_67-1:

Christos 330
25-05-10, 20:35
Πανο απο Αθηνα δεν εχει τιποτα . . .

gyiama
26-05-10, 09:25
κάλυψη κρυστάλλων δεν έχετε? :whistle:

ααααααα Νικο δεν ειναι σωστα πραγματα αυτα :innocent::innocent:

NickE60
26-05-10, 10:03
ααααααα Νικο δεν ειναι σωστα πραγματα αυτα :innocent::innocent:

χαχαχα Καλό..! :original: